Parts Catalog

Storeroom lock Outside lever fixed, entrance by key only Inside lever always unlocked Available in SFIC and Non-SFIC configurations.

Schlage ND80, compatible with small format interchangeable cores (SFIC)

Privacy Lock/Bathroom Lock Push-button locking, can be opened from outside with a small screwdriver. Turn inside lever or close door to release button.

Schlage ND10 lever set. Passage function, no lock on either side. Satin chrome finish.

Used for cash office doors and Pharmacies

Schlage L9456 mothers room door with indicator. Does not come with key cylinder, recommend reusing existing cylinder when replacing. If old cylinder is not usable, use part number 80-103 626 for the compatible mortise housing for SFIC co… Read More

Schlage ALX80, SFIC Prep. Keyed on outside, blank on inside.

Schlage ALX80, standard core, lock on outside, blank on inside.

ALX 50P, push button lock for fitting rooms, standard core. Push button on inside, standard key core on the outside.

Adams Rite dead lock for storefront vestibule doors. 7/8in backset. If you are not familiar with how to measure backset, please click HERE

Adams Rite dead lock for storefront vestibule doors. 1-1/8in backset. If you are not familiar with how to measure backset, please click HERE &nb… Read More

Passage lever set (no lock), blank on both sides.

Entrance/Office lock, SFIC prep on outside, push button on inside. Equivalent to Schlage ND50.

Used on autocare centers when paired with a lever trim kit. Pushbars with no trim are sometimes used as on emergency exit doors as well. This version is for 3ft wide doors. Hex Dogging kit included and pre-installed.

Fire rated exit device with top vertical rod only. Used on interior fire doors. To preserve fire rating, must be ordered in pairs.

Mostly found in garden centers on emergency exit gates. Weatherized for outdoor use.

Positive locks must be ordered by Store Management or GMTs directly through Positive Lock Inc. due to AP concerns. They are not available through Tristate Commercial Doors. If you need a positive lock, please call (or have store manageme… Read More

Von Duprin 99 series push bar, exit only, for 4ft wide doors.

Detex V40 panic bar, weatherized with alarm kit, for 4ft wide doors/gates.

Dexter ED1000 heavy duty panic bar – 3ft – Equivalent to Von Duprin 99 panic bar.

Dexter ED1000 heavy duty panic device. Equivalent to Von Duprin 99 panic bar.

Dexter ED1500 heavy duty panic bar, 3ft. Equivalent to Von Duprin 22 panic bar.

Dexter ED1500 heavy duty panic bar, 4ft. Equivalent to Von Duprin 22 panic bar.

Used in Auto Care Centers with request-to-exit devices.

Von Duprin 6211 electric strike. Found mostly in the auto center if the brand is not HES. This is the 12v version 626 Finish

Von Duprin 6211 electric strike. Found mostly in the auto center if the brand is not HES. This is the 24v version 626 Finish

Found in some store in TLE/Auto center and other types of doors. Less common than the HES 9600 and 7501

Walmart Spec closer. Used on storefront doors, office doors, passage doors, etc.

This is the same as a normal LCN 4040 closer, but includes a wing nut to hold the door open if needed. Seen most commonly on manual cart doors.

Thru-bolt and self-drilling/tapping screw pack for LCN 4040 closers

Replacement arm and shoe for LCN 4040 closer

Heavy Duty Door Closer – Equivalent to LCN 4040

Detex EAX-500 alarm box, used to alarm fire exit doors at some locations

Door Bell, Edwards Signaling, 120VAC, .07A, Gray

Door Bell, Edwards Signaling, 24VAC, .35A, Gray

Door Bell, Edwards Signaling, 24VDC, .074A, Gray

Alarm board for 4ft long Von Duprin 22 push bars

Bosch D150i PIR request to exit sensor, TLE bay sensor

SFIC mortise housing. Used in Von Duprin 22 ALK boards.

Schlage SFIC mortise housing for use in storefront locks by Adams Rite.

Schlage SFIC mortise housing for used in Schlage L-series mortise locks.

1-1/8 inch mortise cylinder, Schlage C Keyway, 2 keys satin chrome finish

1 inch mortise cylinder, Schlage C keyway, 2 keys, satin chrome finish

Blank dummy cylinder for filling lock mech holes in Auto doors. Stanley auto door lock accessory.

1” mortise thumb turn, brushed chrome finish

Hex Dogging key for Von Duprin panic devices (push bars)

#11 Detex assembly/disassembly key

#12 Detex Key

#13 Detex Key

#14 Detex Key

#15 Detex Key

#16 Detex Key

#17 Detex Key

#18 Detex Key

#19 Detex Key

#20 Detex Key

FULL LENGTH ROTON HINGE, FULL SURFACE, GEARED HINGE, CONTINUOUS HINGE, PIANO HINGE, 83IN, SATIN ALUMINUM FINISH, 1/32in inset

FULL LENGTH ROTON HINGE, FULL SURFACE, GEARED HINGE, CONTINUOUS HINGE, PIANO HINGE, 84IN, SATIN ALUMINUM FINISH, 1/16in inset

Top Latch for Von Duprin 99 series push bars with surface mounted vertical rods. Found mostly on fire doors. Comes as a bare latch, cover not included.

Replacement end cap for Von Duprin 99 series push bars. Metal, rather than plastic to resist impact.

Standard Von Duprin hex dogging assembly. Includes dogging assembly and one hex dogging key. Typically used on auto center doors.

Von Duprin 22 dummy pull trim for OGP/ODP doors

Von Duprin 9927 Center Case Cover, For Interior Fire Doors

Von Duprin 99 Center Case Cover, for TLE customer entrance doors

Von Duprin 9927 extension rod for doors over 7ft tall. For interior fire doors

Von Duprin 9927 top rod. For Interior fire doors

Von Duprin 99 lever trim, standard, Right Hand Reverse. TLE customer entrance.

Von Duprin 99 lever trim, standard, Left Hand Reverse. TLE customer entrance

Von Duprin 99 lever trim, blank escutcheon, Right Hand Reverse. For fire doors

Von Duprin 99 lever trim, blank escutcheon, Left Hand Reverse. For fire doors

Securitron single gang push to exit button with LED and interchangable green or red push button. Used in TLE/Auto Center

Push to exit button with interchangeable faceplates.

LCN7810-E400 4 inch extension rod for LCN7800 series magnets. Fire door accessory.

LCN7810-E200 2 inch extension rod for LCN7800 series magnets. Fire door accessory

LCN7810-E100 1 inch extension rod for LCN7800 series magnet. Fire door accessory

LCN7810-E075 3/4 inch extension rod for LCN7800 series magnets. Fire door accessory.

LCN7810-E050 1/2 inch extension rod for LCN7800 series magnets. Fire door accessory.

LCN SEM 7810-514 ball pivot connection for extension rods. Fire door accessory

LCN SEM 7820 electromagnetic door hold open magnet. Floor mount, painted aluminum finish. For fire doors

LCN SEM 7830 electromagnetic door hold open magnet. Surface wall mount, low profile armature, aluminum painted finish. For fire doors

LCN SEM 7850 electromagnetic door hold open magnet. Standard profile, recessed wall mount, Aluminum painted finish. For fire doors

Drop plate for LCN 4040 closer. Parallel arm applications, narrow stile.

Ives one-way door viewer, 150 degree view angle, satin chrome finish

Latch protector for cylindrical lever sets (Schlage ND series, Falcon, Yale)

Detex, End cap for V40 push bars, garden center, plastic end cap

Adams Rite exit indicator for doors up to 1-3/4in thick

Filler plate for strike plates

Door stop, floor mounted

Push plate, 3in x 12in. For restroom doors.

Pull plate, 3.5in x 15in. For restroom doors.

Door stop, door mounted, kick down operation.

Flush bolt for hollow metal doors

24 x 30 window kit for hollow metal doors

Window kit for hollow metal doors, 5×20

Crash bar for cart protection on store front doors. 48 inches.

Hubbell Doorbell switch

Weatherproof neoprene cover for Hubbell doorbell switches.

Manual foot pull for restroom doors

Armor plate for hollow metal doors, 34in x 34in.

Kick plate, 12in x 30in

Kick Plate, 12in x 46in

Weather seal kits for around the perimeter of a door. Installed on the interior perimeter.

Smoke seal, self adhesive, NGP, 21ft roll

Bottom sweeps for pest control. Installed on the interior side of the door.

Bottom sweeps for pest control. Installed on the interior side of the door.

Vinyl bottom sweeps for weather protection and pest control. Installed on the exterior side of the door.

Vinyl bottom sweeps for weather protection and pest control. Installed on the exterior side of the door.  

Heavy Duty brush seal, 3ft.

Heavy duty vinyl sweep. 3ft.

Heavy Duty Brush sweep. 4ft.

Heavy Duty Vinyl Sweep. 4ft.

4ft Brush Sweep, 2in retainer, 3in bristle

4ft Brush Sweep, 2in Retainer, 2in Bristle

Premium 4ft Straight 2.5in bristle brush Please Note: 2 week lead time on these currently

Premium 4ft 45deg Brush Sweep, 2.5in bristle Please note: 2 week lead time on these currently

Premium 4ft straight brush sweep, 1in bristle

Premium 3ft brush sweep, straight, 1in bristle Please note: 2 week lead time currently

Seal kit for 3×7 emergency exit doors. Includes (1) 3\\’ brush sweep, (1) 3\\’ vinyl sweep, and (1) 3×7 perimeter bubble seal.

Seal kit for 4×7 emergency exit doors. Includes (1) 4\\’ brush sweep, (1) 4\\’ vinyl sweep, and (2) 3×78 perimeter bubble seal

Seal kit for 6×7 emergency exit doors. Includes (2) 3\\’ brush sweep, (2) 3\\’ vinyl sweep, and (2) 3×7 perimeter bubble seal.

Sweep kit for automatic double doors. Includes (2) 4ft 1\\” brush with straight retainer and (2) 4ft 3\\” brush with 45* retainer.

36in X 1/4in X 5in saddle threshold, mill aluminum finish

36in X 1/2in X 5in saddle threshold, mill aluminum finish

48in X 1/4in X 5in saddle threshold, mill aluminum finish

48in X 1/2in X 5in saddle threshold, mill aluminum finish

6ft X 5in X 1/4in saddle threshold

6ft X 5in X 1/2in saddle threshold

40 inch drip cap for emergency exit doors, mill aluminum finish

76 inch drip cap for double emergency exit doors, mill aluminum finish

80 inch drip cap for double emergency exit doors, mill aluminum finish

3ft by 7ft door with 5×20 window kit, no hardware prep. For use with doors that are push/pull only.

3ft by 7ft door, prepped for lock set/lever set, 5×20 window.

3ft by 7ft door, 5×20 window, prepped for mortise lock sets.

Door, 3ft x 7ft, prepped for leverset, 43-9/16 latch location, actual measurements: 35-3/4×83-1/8. See attributes for hinge locations. Actual panel measurements: 35-3/4 x 83-1/8.

Door, 3ft x 7ft, prepped for leverset and 24×30 window kit, 43-9/16 latch location. Actual panel measurements: 35-3/4 x 83-1/8.

Door, 3ft x 7ft, prepped for leverset and 7×22 window kit (5×20 visible glass), 43-9/16 latch location. Actual panel measurements: 35-3/4 x 83-1/8.

Door, 3ft x 7ft, prepped for mortise lock, 43-9/16 latch location.Actual panel measurements: 35-3/4 x 83-1/8.

Door, 3ft x 7ft, prepped for mortise lock and 24×30 window kit, 43-9/16 latch location, actual measurements: 35-3/4×83-1/8.  Actual panel measurements: 35-3/4 x 83-1/8.

Door, 3ft x 7ft, no prep, blank for fire exit doors.  Actual panel measurements: 35-3/4×83-1/8

Door, 3ft x 7ft, no hardware prep. Prepped for 24×30 window kit. Actual panel measurements: 35-3/4×83-1/8

Door, 3ft x 7ft, no prep, 7×22 window kit cut out (5×20 visible glass). Actual panel measurements: 35-3/4 x 83-1/8.

Door, 3ft x 7ft, prepped for mortise lock and 7×22 window kit (5×20 visible glass), 43-9/16 latch location. 15 day lead time. Actual panel measurements: 35-3/4 x 83-1/8.

Door, 4ft x 7ft, no prep, door – blank for fire exit doors. Actual panel measurements: 47-3/4×83-1/8

Door, 4ft x 7ft, prepped for lever set, 43-9/16 latch location. Actual panel measurements: 47-3/4×83-1/8

Door, 4ft x 7ft, prepped for mortise lock, 43-9/16 latch location. Actual panel measurements: 47-3/4×83-1/8

Frame, drywall, 3ft x 7ft. 8-1/4 depth, 40-5/16 strike location. Left hand.  15 day lead time

Frame, drywall, 3ft x 7ft. 8-1/4 depth, 40-5/16 strike location. Right hand. 15 day lead time

Frame, Masonry, 3ft x 7ft. 5-3/4 depth, 4\\” header, 40-5/16 strike location, Left hand. 15 day lead time.

Frame, Masonry, 3ft x 7ft. 5-3/4 depth, 4\\” header, 40-5/16 strike location, Right hand. 15 day lead time.

Frame, drywall, 3ft x 7ft. 8-1/4 depth, 40-5/16 strike location, Left hand. 15 day lead time

Frame, drywall, 3ft x 7ft. 8-1/4 depth, 40-5/16 strike location, Right hand. 15 day lead time

Frame, Masonry, 4ft x 7ft. 5-3/4 depth, 4\\” header, 40-5/16 strike location, Left hand. 15 day lead time

Frame, Masonry, 4ft x 7ft. 5-3/4 depth, 4\\” header, 40-5/16 strike location, Right hand. 15 day lead time

Frame, Masonry, knock down, 6ft x 7ft, no strike location. 4\\” header. No mullion. 15 day lead time

Frame, Masonry, welded, 5-3/4 depth, 4\\” header, welded 4\\” mullion. 15 day lead time

Schlage ALX 50 SFIC lever set for fitting rooms. Push button inside, keyed outside.

Adams Rite dead lock for storefront vestibule doors. 1-1/2in backset. If you are not familiar with how to measure backset, please click HERE

Adams Rite dead lock for storefront vestibule doors. 31/32in backset. If you are not familiar with how to measure backset, please click HERE